User Tools

Site Tools


notes:atari:emulators

Atari Emulators

Atari800Win Plus

Console Keys

Key Atari
F1 Help key
F2 Select key
F3 Option key
F4 Start key
F5 Warm reset

Configure a hard drive:

  • Menu Atari > Hard disks…
  • Select a path, for example, for the hard disk H1 to point to any folder on PC
  • Press OK
  • Menu Atari > Settings…
  • In the Devices section:
    • Check the Enable H: path for hard disk devices checkbox
    • Uncheck the Use H: devices in Read Only mode checkbox

Now you can use BASIC commands to access the hard drive:

LIST "H1:PROGRAM.BAS"
ENTER "H1:PROGRAM.BAS"

Links

Altirra

Key Atari
F2 Start key
F3 Select key
F4 Option key
F5 Warm reset
F6 Help key
Shift+F5 Cold reset

Debugger:

Key Function
F8 Run/Break
F10 Step Over
F11 Step Into
Command Description
r Displays registers
r reg val Loads val to reg
.dumpdsm Dump disassembly to a file
.writemem Write a block of memory to a file
Syntax:
.writemem <path> <xaddress> <length>
 
Example:
.writemem c:\temp\test.txt 9000 4096
 
Remarks:
The address may use extended memory syntax, i.e. v:4000 for VBXE memory.

Links:

notes/atari/emulators.txt · Last modified: 2016/10/12 by admin